Rubber Manchon Black With Adhesive

SBR rubber hose liner tube with NBR adhesive layer, black

Black SBR rubber liner tube with an NBR adhesive layer, drawn or woven into polyester or polyamide hose jackets and vulcanised.

Properties

elongation at break 350 %
tensile strength 1,000 N/cm³
Shore A approx. 60
During vulcanisation both layers obtain their physical properties and develop adhesion to the fabric
Adhesion with normal synthetic yarns: 30 to 40 N; with rubber-friendly finished yarns: 80 N
Storage: up to 6 months from the production date when stored properly (cool, i.e. below 25 °C, dry and dark)
Can be drawn or woven into the hose fabric and vulcanised without further treatment; steam, infrared or hot air can be used to activate the white adhesive layer. Heating time depends on local conditions and fabric construction. Guide value for steam vulcanisation: 8 minutes at 5 bar steam pressure.

Material: Compound of SBR (styrene butadiene rubber) with NBR (nitrile butadiene rubber) adhesive
Temperature range: -30 °C to +60 °C (short-term up to +80 °C)

Lining of woven hose jackets of all fabric types, such as polyester and polyamide

Inner diameter*mm	Inner diameter*inch	Lay-flat widthmm	Weight**g/m	Delivery length***m	Wall thicknessmm
19	3/4	24	70	3,000	0.8
25	1	34	89	3,000	0.8
38	1 1/2	51	126	2,500	0.8
42	1 2/3	56	140	2,000	0.8
45	1 3/4	59	149	2,000	0.8
52	2	71	171	2,000	0.8
65	2 1/2	90	218	1,500	0.8
70	2 3/4	97	236	1,200	0.8
75	3	105	260	1,000	0.8
90	3 1/2	128	310	800	0.8
102	4	143	344	600	0.8
110	4 1/3	152	376	600	0.8